Back to blog

The price of French décennale insurance by trade and revenue in 2026

Real rates by activity family, the effect of QBE's withdrawal on pricing, and how to present a submission that keeps you insurable.

Julien Falémé·8 min read

The price of décennale insurance — France's mandatory ten-year construction liability cover — is calculated by applying a rate to your declared construction revenue, and that rate depends first on the trade: roughly 1 to 3 % for finishing and technical fit-out work, 3 to 8 % for structural work, and more for the most claims-heavy techniques such as waterproofing or timber construction. For a company turning over €1m to €5m, the annual premium therefore runs into tens of thousands of euros. In 2026 that budget is rising for a structural reason: fewer insurers remain in this market than three years ago.

How is the price of décennale insurance actually calculated?

Unlike a commercial package policy, décennale cover is not priced as a flat fee. The insurer starts from your forecast construction revenue, splits it activity by activity according to your policy's schedule of trades, and applies a specific rate to each line. The sum is the premium, plus taxes and handling fees.

The schedule of trades is the list of works you are authorised to carry out under cover. Each line corresponds to a precise technical code (masonry, timber framing, waterproofing, electrical work). Work performed in an undeclared activity is simply not covered, even with a policy in force and the premium paid. And the premium tracks activity: most contracts provide for an annual adjustment based on revenue actually achieved.

What are the rates and prices by trade in 2026?

The ranges below are those observed in the French market for structured companies with several employees and a neutral claims record. They do not replace a quotation, but they tell you whether your policy is in line with the market.

Activity familyIndicative rate on construction revenueAnnual premium for €1m of revenueMain aggravating factor
Technical fit-out (electrical, plumbing, HVAC)1 % to 2.5 %€10,000 to €25,000Uncontrolled subcontracting
Finishes (painting, coverings, plastering)0.8 % to 2 %€8,000 to €20,000Outdoor work
Joinery and closures1.5 % to 3 %€15,000 to €30,000Façade installation
Structural work, masonry3 % to 6 %€30,000 to €60,000Foundations, underpinning
Roofing, framing, waterproofing4 % to 8 %€40,000 to €80,000Flat roofs, external insulation
Timber construction, non-standard techniques6 % to 12 %€60,000 to €120,000No technical approval

These rates do not scale linearly: the higher the revenue, the lower the average rate tends to be, because the policy's minimum premium weighs less. For reference, comparison sites put décennale cover at €150,000 of revenue at around €800 to €1,200 a year for an electrician and €1,400 to €1,800 for a mason.

The notion of "standard technique" is decisive here. A standard technique is a construction process covered by a DTU (unified technical document), a standard, or a valid Technical Approval. Anything outside that framework — an innovative process, a bio-based material without approval, a non-compliant installation method — becomes a non-standard technique, underwritten separately at a markedly higher rate, when it is accepted at all.

Why are prices rising in 2026 after QBE's withdrawal?

QBE has confirmed its full withdrawal from the French construction market, exiting ten-year liability cover with effect from 31 December 2026, citing degraded conditions: fewer housing starts, rising costs, longer timelines and multiplying disputes. That departure extends a consolidation that began in 2023.

Three effects compound. Scarcity first: fewer insurers means less competition on mid-sized files and harsher selection on heavy risk profiles. Technical inflation second: the BT01 construction cost index rose by around 7 % in 2024, which feeds the cost of claims to be settled ten years later. Climate-driven claims third, in particular clay soil shrink-swell, which hits foundation and structural trades. The increases announced for 2026 by specialist brokers most often fall between 5 % and 15 %, with peaks on masonry, framing, roofing and external wall insulation.

In a market where only two or three insurers can still take your risk, the quality of your submission no longer just moves your premium: it decides whether you are insurable at all.

We covered the consequences of this move in our analysis of QBE's withdrawal from the construction market.

What really drives the price of décennale cover?

Trade and revenue explain most of the amount, but four other variables move the needle. Track record and claims history weigh heavily: a company less than two years old generally pays a loading, whereas three to five years without a declared claim opens access to the best rates. The deductible — the share of each claim you keep on your own books — is an immediate lever: raising it lowers the premium, but it must stay compatible with your cash position on a structural claim.

Subcontracting is the third and most underestimated factor: you remain liable for your subcontractors' work under the ten-year regime, and the insurer checks that you collect their up-to-date certificates, with any gap paid for in loadings or exclusions. Finally, professional qualifications (Qualibat, RGE) signal technical control and often earn a few rate points.

How should you present your submission to get the best price?

A décennale submission is prepared like a financing file: the insurer must be able to answer three questions in ten minutes — what exactly do you do, with whom, and what has happened so far. So gather the last three years of revenue split by activity, the forecast, the precise list of activities requested, a five-year claims record from previous insurers, your qualifications, a technical org chart, your subcontracting policy and three representative project references.

If you have had a claim, add a one-page note on the cause and the corrective measures. This changes everything: an explained and corrected claim can be priced, while a claim discovered after the fact in the claims record takes the file out of the running. The same logic applies to your other policies, as our ten levers for reducing an insurance premium show.

What does it cost to be uninsured, or badly insured?

Ten-year liability insurance is mandatory for every constructor within the meaning of article 1792 of the French Civil Code, under article L241-1 of the Insurance Code. Failing to insure is a criminal offence: article L243-3 of the same code provides for up to six months' imprisonment and a €75,000 fine. Beyond the criminal sanction, the director exposes personal assets, since the repair obligation remains due for ten years with no risk carrier behind it.

The most frequent risk, however, is not the absence of a policy but the gap between declared activities and work actually performed. A masonry firm that starts installing external wall insulation without declaring it is not covered on those sites: the policy exists, the certificate circulates, the guarantee does not respond. It is the leading cause of unindemnified claims we find in sector audits.

Frequently asked questions

Does the price of décennale cover depend on headcount?

Only indirectly. The rating base is construction revenue, not headcount. But headcount and team qualifications serve as an indicator of technical control, and a company that subcontracts most of its output is assessed differently from one that executes in-house.

Can you change décennale insurer mid-year?

Usually at the annual renewal date, with notice of generally two months. If the insurer cancels — as in a market withdrawal — you are informed in advance and must replace the risk before the effective date to avoid any gap in cover.

What happens to cover on projects already delivered if my insurer withdraws?

Projects accepted during the policy period remain covered for ten years under the run-off guarantee. An insurer's withdrawal does not apply retroactively to works already delivered: it only leaves you without cover for sites started after the cancellation takes effect.

Is a 15 % increase at renewal negotiable?

Often yes, but not by arguing about the percentage. It is negotiated by reworking the parameters: an exact split of revenue by activity, removal of activities no longer performed, deductible adjustment, evidence of technical control, and genuine competition among the carriers still active in your segment.

At Lesto, we treat décennale cover as an underwriting submission to be built, not a price to be compared: we split your revenue activity by activity, document your claims history and qualifications, then approach the insurers still open to your profile — nine carriers per file on average, with an analysis delivered in 72 hours. Discover how we support construction companies.

Recommended coverage

Our Construction insurance

The coverages we recommend to companies in the Construction sector.

Decennial Liability (RC Décennale)

Mandatory before any construction project starts, for companies carrying out building work.

Latent Defects Insurance (Dommages-Ouvrage)

Pre-funds decennial repairs without waiting for the outcome of a claim, so the project owner isn't left stuck.

Contractor's All Risk (TRC)

Covers the works and on-site materials against theft, bad weather and collapse for the full duration of construction.

Tags

  • #decennial insurance
  • #pricing
  • #construction
  • #France
  • #QBE
Julien Falémé

Julien Falémé

Co-founder

Julien Falémé is the co-founder of Lesto, the next-generation insurance broker for SMEs. After several years in B2B tech sales (Riot, Theodo Group), he founded Lesto with the conviction that SME founders deserve the same level of risk analysis as large corporations.

LinkedIn →